Grappa
Styles
Terroir
Human factors
- In the distillation, natural liquid wine lees may be used up to 25 kg per 100 kg of pomace, but the alcohol derived from them may not exceed 35 per cent of the total alcohol of the finished product.
- The Italian origin of the raw materials is verified through the accompanying documents and the distillers' registers.
- The production of Grappa reflects Italy's winemaking vocation, also in relation to the well-established activity of distilling by-products.
- The distillation of fermented or semi-fermented pomace is carried out either directly with steam or after adding water to the still together with the pomace, in continuous or discontinuous plants.
- The distillation of fermented or semi-fermented pomace must take place at less than 86 per cent by volume; within this limit redistillation is permitted, and no addition of ethyl alcohol of any origin is allowed.
- After distillation, the distillate at full strength is reduced with water, may be chilled or filtered, and may be aged for at least twelve months in unvarnished, uncoated wood, in facilities located on national territory.
Product characteristics
- Grappa must have a minimum alcoholic strength by volume of 37.5% vol. and a methyl alcohol (methanol) content not exceeding 1000 g/hl of alcohol at 100% vol.
- It appears as a clear, brilliant liquid, colourless and crystalline, or with hues deriving from the plants or fruits used for flavouring, or amber in colour if aged in wood.
- The sugar content, expressed as invert sugar, is at most 20 g/l, and the volatile substances other than ethyl and methyl alcohol amount to at least 140 g/hl of alcohol at 100% vol.
Terroir / product link
- The production of Grappa is tied to its territory of origin: the abundant availability of fresh and fermented pomace has led to a particular distillation system, and the low-strength alcoholic vapours obtained allow the product to retain a wide range of aromatic components.
Facts drawn from the specification's terroir-link section by automatic interpretation — see the source.
About this boundary
Approximate area — the union of the administrative units named in the document (Eurostat GISCO or national cadastre boundaries). Units drawn: Italy.
Sources
- Technical file (EU GI register, PDF)
- The Commission's English translation (PDF)
- eAmbrosia register (EU) — File number PGI-IT-01844