Kirsch Trentino
Styles
Terroir
Natural factors
- Kirsch Trentino or Kirschwasser Trentino is obtained exclusively by alcoholic fermentation and distillation of cherries of the species Prunus cerasus and Prunus avium.
- The production area comprises the entire territory of the Autonomous Province of Trento.
Human factors
- Only potable water from the Autonomous Province of Trento, of certified quality and possibly softened but not demineralised, is used to reduce the spirit to bottling strength.
- The fruit, fresh or suitably preserved, must be processed in such a way as to preserve its organoleptic characteristics, and the origin of the raw materials is shown by the accompanying documents and the distillers' registers.
- Since the Second World War, the abundance of cultivated raw material and the Tullio Zadra distillation method have allowed fruit distillation in Trentino to take off, with production of the very highest quality.
- Kirsch Trentino is obtained by distilling the fermented mash in a batch (discontinuous) still, including after water has been added to the pot, with distillation carried out at less than 86 per cent by volume.
- Batch bain-marie stills with a separate boiler and distillation column, following the traditional Tullio Zadra method, allow the low wines to be rectified in batches and the heads and tails to be cut.
- The distillation of stone fruits and berries in Trentino dates back more than two centuries and is tied to traditions learned when Trentino became part of the Austro-Hungarian Empire, where this craft was already widespread.
Product characteristics
- "Kirsch Trentino" or "Kirschwasser Trentino" has a minimum alcoholic strength by volume of 40% vol. and not more than 50% vol.
- On the palate and nose, the distillate shows a typical fruity aroma of ripe cherry and red fruit, with a characteristic flavour, and is clear in appearance.
- The product must contain at least 200 g/hl of pure alcohol (100% vol.) of volatile substances other than ethyl and methyl alcohol, with specific limits on butan-2-ol (max. 80 g/hl of pure alcohol), hydrocyanic acid (max. 5 g/hl of pure alcohol) and ethyl carbamate (max. 0.8 mg/L).
Terroir / product link
- Dilution to bottling strength is traditionally done with Trentino drinking water, whose mineral salts depend on the geological formation (porphyry and dolomite) and influence the aroma and taste of the fruit spirit.
Facts drawn from the specification's terroir-link section by automatic interpretation — see the source.
About this boundary
Approximate area — the union of the administrative units named in the document (Eurostat GISCO or national cadastre boundaries). Units drawn: Provincia Autonoma di Trento.
Sources
- Technical file (EU GI register, PDF)
- The Commission's English translation (PDF)
- eAmbrosia register (EU) — File number PGI-IT-01905